Phoenamide N1100

Phoenamide ® N1100

Polyamide (Nylon) Type 6 – Impact Modified

Date: January, 2008

General
Features		Excellent chemical resistance Excellent toughness Good low temperature impact
Appearance		Off white or pigmented Pellets
Processes		Injection molding
Typical Compound Properties(a)	Nominal Values			Test Methods(b)
Physical	English Units		Metric Units
Relative Viscosity	50.0 cP		50.0 kPa•s	ASTM D789
Melt Point	419 ºF		215 ºC	ASTM D789
Specific Gravity	1.10		1.10	ASTM D792
Water Absorption	1.50%		1.50%	ASTM D570
Linear Mold Shrinkage	0.012 in/in		0.012 mm/mm	ASTM D955
Hardness, Rockwell Scale	R110		R110	ASTM D785
Coefficient of Linear Thermal Expansion	6.00 x 10-5 in/in ºF		1.04 x 10-4 cm/cm ºC	ASTM D696





Mechanical(c)
Notched Izod Impact @ 73 ºF (23 ºC)	2.5 ft-lb/in.		133.5 J/m	ASTM D256
Tensile Strength @ Yield	8,500 psi		58.6 MPa	ASTM D638
Elongation @ Break	100%		100%	ASTM D638
Flexural Strength	12,000 psi		82.8 MPa	ASTM D790
Flexural Modulus, tangent	280,000 psi		1,931 MPa	ASTM D790
Heat Deflection Temperature @ 66 psi (0.455 MPa) @ 264 psi (1.82 MPa)	295 ºF 140 ºF		146 ºC 60 ºC	ASTM D648 ASTM D648

(a) Values shown represent nominal averages and are not to be construed as product specifications.
(b) ASTM methods are the latest under the Society’s current Procedures. All Molded specimens are prepared by injection molding.
(c) Properties measured on “Dry As Molded” test specimens.

Manufacturer makes no warranties as to the fitness for any purpose or the merchantability of any products referred to herein, no guarantee of satisfactory results from any use of, or reliance upon the information or data contained herein, and no guarantee that the use of any product will not infringe any patent. Manufacturer hereby disclaims all liability for any loss or damage resulting from the use of information and data contained herein.

PDF Download materials are provided in Adobe® Acrobat® Format. If you do not have Adobe® Reader® installed on your computer, you will need to download and install the Plug-In by clicking on the Get Adobe Reader Icon below.